# 462x-CSI camera
# Overview
Low-light MIPI for Raspberry Pi & Jetson. The 462x-CSI-M12 outputs raw stream through a 4-lane CSI-2 connector while keeping the price and footprint tiny.
- IMX462 RGB or Mono sensor, M12/M12L or bare board
- 22-pin FFC (0.5mm) standard connector
- <1 W typical - perfect for edge-AI, night-vision robots
[](https://wiki.kurokesu.com/uploads/images/gallery/2025-06/image-1750838981006.jpg)
#### Camera variants
**SKU** | **Lens mount** | **Chroma** | **Note** |
462C-CSI-M12 | 9.5mm for wide angle lenses | RGB Color | Most common use for wide angle and fish-eye lenses. |
462C-CSI-M12L | 14.7mm for regular and telephoto lenses | RGB Color | Modification for lenses above 6mm (typical) |
462M-CSI-M12 | 9.5mm for wide angle lenses | Mono | Same as C3-462C-M12 but Mono sensor for better light sensitivity |
462M-CSI-M12L | 14.7mm for regular and telephoto lenses | Mono | Same as C3-462C-M12L but Mono sensor for better light sensitivity |
# Pinout
[](https://wiki.kurokesu.com/uploads/images/gallery/2025-06/image-1750839622645.png)
#### MIPI CSI2 wiring
Interface connector 22pin 0.5mm pitch [687122183622](https://www.we-online.com/en/components/products/FPC_0_5_SMT_ZIF_HORIZONTAL_TOP_CONTACT_LOW_PROFILE_6871XX183622) from Würth Elektronik. Top facing pins.
**Pin** | **Signal** | **Description** |
1 | GND | |
2 | D0\_N | |
3 | D0\_P | |
4 | GND | |
5 | D1\_N | |
6 | D1\_P | |
7 | GND | |
8 | CLK\_N | |
9 | CLK\_P | |
10 | GND | |
11 | D2\_N | |
12 | D2\_P | |
13 | GND | |
14 | D3\_N | |
15 | D3\_P | |
16 | GND | |
17 | ENABLE | Wired to sensor XCLR |
18 | N.C. | |
19 | GND | |
20 | SCL | |
21 | SDA | |
22 | +3.3V | |
#### AUX wiring
Interface connector 5 pin 1mm pitch [665305124022](https://www.we-online.com/en/components/products/WTB_1_00_SMT_MALE_VERTICAL_SHROUDED_HEADER_6653XX124022) from Würth Elektronik.
**Pin** | **Signal** | **Description** |
1 | XMASTER | Master / Slave selection |
2 | XHS | Horizontal sync signal |
3 | XVS | Vertical sync signal |
4 | TRIG | Trigger mode input |
5 | GND | |
# Dimensions
- Board dimensions: 26 x 26 x 8.31mm
- Weight: 2.78g
[](https://wiki.kurokesu.com/uploads/images/gallery/2025-06/image-1750839728523.PNG)