# Final notes #### Image sensor Most likely Logitech Brio uses [Sony IMX091PQ](https://en.wikipedia.org/wiki/Exmor) sensor. Pixel count, size and dimensions look right.
Pixel count 4208 x 3120pixels
Megapixels 13Mega pixels
Active area size- Horizontal = 4.69 - Vertical = 3.52 - Diagonal = 5.87 mm
Active area size1/3.06inch
Pixel size1.12μm, square
#### Dust Dust is common thing and by exposing camera to uncontrolled environment expect some can settle on the sensor. If not during rework, dust can appear after some usage. Usually local photo equipment retailers have kits and tools to clean camera sensors. #### Light filter After completing rework, camera will be sensitive to full spectrum. Depending on your application feel free to leave it as is or use [IR LOW PASS filter](http://www.kurokesu.com/shop/lenses/F2LOW650) for normal operation or [IR HIGH pass filter](http://www.kurokesu.com/shop/lenses/F2HIGH850) to see infrared part of available light. Filter can be mounted with few strips of double sided tape. Filter installation is same as for [C920 camera](https://wiki.kurokesu.com/books/c920-rework-kit/page/mounting-a-filter) #### Lenses

Stock Brio lens focal length is **2.78mm**

Camera has high resolution, with low quality lens you will get low quality picture. We offer only tested [lenses](http://www.kurokesu.com/shop/lenses). #### More details and discussion [Original blog post with discussion](https://www.kurokesu.com/main/2017/09/18/logitech-brio-4k-webcam-rework-instructions/)