C1 PRO X18
Lightweight, USB powered, self sufficient 5.5~96mm motorized zoom lens camera kit for day/night operation
Overview
Lightweight, USB powered, self sufficient 5.5~96mm motorized zoom lens camera kit for day/night operation. Kit is fully assembled and tested before shipping.
- Uses PCBA module used in C1 PRO camera.
- Controller SCF4-L087 (featuring SCF4-M module)
Lens specifications
Optics
| Lens SKU | L087-MZFD-5.35Z96.3-DIRECT |
| Image sensor | 1/2.7" Effective image area > 6.8mm |
| Focal distance | 5.85±5% ~ 93.6±5%mm |
| Aperture | f/1.8~f/3.9 |
| Focus range |
|
|
Field of view (D=6.71mm) |
|
|
Distortion |
|
Mechanics
| Lens length (image surface-top lens barrel) | 79.74mm (in glass) |
| Mechanical back focus | -0.92 (in glass t=0.5 BK7) |
| Lens zoom structure | The stepper motor is directly connected to the screw |
| Lens focusing structure | The stepper motor is directly connected to the screw |
| Lens size |
|
Motor specifications
| Screw pitch | 0.4mm |
| Spiral rotation direction | Right |
| Rated voltage | 5.0 VDC |
| Coil resistance | 55Ω ± 10% |
| Phase count | 2 |
| Step angle | 18° / step |
| Max start frequency | 800 PPS/min @ at 5.0 VDC |
| Max operating frequency | 1200 PPS/min @ 5.0 VDC |
| Pull torque | 2.8 gf-cm min (at 480 PPS @ 5.0 VDC) |
|
Push torque |
3.8 gf-cm min (at 480 PPS @ 5.0 VDC) |
| Operating temperature range | -20°C ~ +70°C |
Position alignment sensor PI
| Model number | RPI-222 / ROHM |
IR switch
| Coil resistance | 25 ± 5Ω |
| Operation voltage |
4.5V |
| Current consumption |
144~200mA |
| Switching time |
200-500ms |
| Filters |
|
Zoom-Focus curve diagram
Pinout
Pinout
Lens signals routed by 24 pin 0.5mm pitch FFC cable. Contacts facing bottom. Recommended connector Wurth Electronics 68712414522
| Nr | Function |
| 1 | ZOOM MOTOR XB |
| 2 | ZOOM MOTOR B |
| 3 | ZOOM MOTOR XA |
| 4 | ZOOM MOTOR A |
| 5 | FOCUS MOTOR XB |
| 6 | FOCUS MOTOR B |
| 7 | FOCUS MOTOR XA |
| 8 | FOCUS MOTOR A |
| 9 | IR Drive + |
| 10 | IR Drive - |
| 11 | FOCUS PI(Anode, Collector) |
| 12 | FOCUS PI(Emitter) |
| 13 | FOCUS PI(Cathode) |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 | |
| 20 | |
| 21 | |
| 22 | ZOOM PI(Emitter) |
| 23 | ZOOM PI(Cathode) |
| 24 | ZOOM PI(Anode, Collector) |
Dimensions
Camera dimensions
| Length | 90.5mm |
| Width | 45mm |
| Height | 52.1mm |
Camera drawings
3D models
3D models can be downloaded from GitHub
Control software
SCF4-SDK comes with open-sourced command line and GUI sample programs for rapid controller evaluation. A simple control software example is provided for testing and demonstration. Software is given "as is" to help with getting started and testing.
More details and control explanation in SCF4 documentation. Source code is maintained on GitHub
Power consumption
SCF4 controller
Typical power consumption looks like in diagram below
Where:
- Com port is open and controller initialized
- IR filter switched on and off several times
- IR light switched off and on two times
- Regular motor operation. Homing and toggle between few presets
C1 PRO camera
Camera typical power consumption looks like in diagram below
Where:
- Camera powered on
- Software requests to open camera
- Actual data transfer starts
- Camera preview closed, camera switched off