C1 PRO X3
Lightweight and compact USB powered, self sufficient 3.4-10mm motorized zoom lens camera kit for day/night operation
Overview
Lightweight and compact USB powered, self sufficient 3.4~10mm motorized zoom lens camera kit for day/night operation.
- Board level camera C1 PRO camera with USB MINI connector
- Controller SCF4-L050 (featuring SCF4-M module)
Lens specifications
Optics
Image sensor | 1/2.7" Effective image area > 6.8mm |
Focal distance | 3.4±5% ~ 10±5%mm |
Aperture | f/1.7~f/3.0 |
Focus range |
|
Field of view (D=6.6mm) |
|
Relative contrast |
|
Distortion |
|
Mechanics
Mechanical back focus | -0.35 (in glass t=0.4 BK7) |
Lens zoom structure | The stepper motor is directly connected to the screw |
Lens focusing structure | The stepper motor is directly connected to the screw |
Lens size |
|
Motor specifications
Screw pitch | 0.4mm |
Spiral rotation direction | Right |
Rated voltage | 4.5-5.0 VDC |
Coil resistance | 55Ω ± 10% |
Phase count | 2 |
Step angle | 18° / step |
Max start frequency | 800 PPS/min @ at 5.0 VDC |
Max operating frequency | 1200 PPS/min @ 5.0 VDC |
Pull torque | 2.8 gf-cm min (at 480 PPS @ 5.0 VDC) |
Push torque |
3.8 gf-cm min (at 480 PPS @ 5.0 VDC) |
Operating temperature range | -10°C ~ +70°C |
Position alignment sensor PI
Model number | RPI-222 / ROHM |
IR switch
Coil resistance | 25 ± 5Ω |
Operation voltage |
4.5V |
Current consumption |
144~200mA |
Switching time |
200-500ms |
Filters |
|
Zoom-Focus curve diagram
Pinout
Pinout
Lens signals routed by 24 pin 0.5mm pitch FFC cable. Contacts facing top. Recommended connector Wurth Electronics 687124183622
Nr | Function |
1 | ZOOM Anode, Collector |
2 | ZOOM Cathode |
3 | ZOOM Emitter |
4 | |
5 | |
6 | |
7 | |
8 | |
9 | |
10 | |
11 | |
12 | FOCUS Cathode |
13 | FOCUS Emitter |
14 | FOCUS Anode, Collector |
15 | IR-cut - |
16 | IR-cut + |
17 | FOCUS A- |
18 | FOCUS A+ |
19 | FOCUS B- |
20 | FOCUS B+ |
21 | ZOOM A- |
22 | ZOOM A+ |
23 | ZOOM B- |
24 | ZOOM B+ |
Dimensions
Lens dimensions
Length | 50.2mm |
Width | 28mm |
Height | 34.75mm |
Camera drawing
3D models
3D models can be downloaded from GitHub
Control software
SCF4-SDK comes with open-sourced command line and GUI sample programs for rapid controller evaluation. A simple control software example is provided for testing and demonstration. Software is given "as is" to help with getting started and testing.
More details and control explanation in SCF4 documentation. Source code is maintained on GitHub