C1 PRO

Industrial USB camera with CS lens mount and h.264 on-board encoder

Overview

C1 family camera C1 PRO with Sony Exmo R Starvis IMX290 sensor offers h.264/MHPEG/YUYV compressions over USB interface.

1″-32TPI mount for CS lens
Multiple mounting options (all side walls and top has M3 tapped holes) for machine vision or robotics
1/4-20 UNC thread for tripod mounting
Format: 1/2.8-inch (6.46mm)
Sensor: Sony IMX290
MJPEG/h.264/YUY2 compression
1920x1080 @ 30fps
UVC compatible
Sensor pixel size: 2.9μm x 2.9μm
Sensor dynamic range: 66db
SNR max: 40.5db
Operation temperature range: -50°C...+85°C
USB 2.0
Interchangeable filters (shortpass 650nm installed by default)
High quality industrial black anodized aluminum case
Non cropped sensor operation in all resolutions
Each camera has unique serial number
RoHS, REACH, CE certified

Pixels	1920H x 1080V
Sensor size	5.63 x 3.17 mm
Shutter	Electronic Rolling Shutter
Sensor pixel size	2.9μm x 2.9μm
Frame rates	h.264 – 30fps in all modes MJPG – 30fps in all modes YUV 4:2:2 (YUYV) 1920x1080 – 5fps 1280×720 – 10fps 640×480 – 30fps
Output frame sizes	1920×1080, 1280×720, 640×480, 640×360, 320×240, 320×180
Scan	Progressive
Manual control	Exposure White balance (2800°K – 9300°K) Gain Gamma Backlight compensation Sharpnes Contrast Saturation Hue Brightness Anti-flicker frequency
Rated power	2W max 350mA @ 5V – h.264 290mA @ 5V – MJPEG / YUYV
Interchangeable filter	17×17×0.5mm. Low pass 650nm filter installed by default, high pass 850nm filter available on request, other filters also can be supplied on special order
Supported OS	Windows OSX Linux Android
Sensor	Sony IMX290
Weight	53g
Dimensions	40×40×23mm
Ingress protection	IP40
Lens mount	CS-mount
Operational temperature	-50 ... 85°C (non condensing)

Typical power consumption looks like in diagram below (MJPEG mode)

Most of the Kurokesu product 3D modes uploaded to Github