C3-462 - High sensitivity, RGB/Mono
Sensor specifications
| Pixels | 1920H x 1080V |
| Sensor size | 5.568 x 3.132 mm |
| Shutter | Electronic Rolling Shutter |
| Sensor pixel size | 2.9μm x 2.9μm |
| Frame rates |
|
| Output frame sizes | 1920×1080, 1600×1200, 1280×720, 1280×960, 800×600, 640×480, 320×240, custom available on request |
| Manual control |
|
| Rated power |
|
| Supported OS |
|
| Sensor | Sony IMX462 |
| Chroma | Available in RGB color and Monochrome version |
Variants
| SKU | Filter | Chroma | Lens mount |
Note |
| C3-462C-M12 | 9.5mm for wide angle lenses | RGB Color | M12 | Most common use for wide angle and fish-eye lenses. |
| C3-462C-M12L | 14.7mm for regular and telephoto lenses | RGB Color | M12L | Modification for lenses above 6mm (typical) |
| C3-462M-M12 | 9.5mm for wide angle lenses | Mono | M12 | Same as C3-462C-M12 but Mono sensor for better light sensitivity |
| C3-462M-M12L | 14.7mm for regular and telephoto lenses | Mono | M12L | Same as C3-462C-M12L but Mono sensor for better light sensitivity |
| C3-462C | Visible band-pass (IRCUT filter) LP0689_P1010 | RGB Color | CS | Essential for real-life colors |
| C3-462C-NF | No Filter | RGB Color | CS | Full spectrum false color imaging |
| C3-462C-NIR1 | Long-pass NIR 850nm filter LP0689-P1012 | RGB Color | CS | Blocks visible light, can see only Infrared. Most likely you need C3-462M-NIR1 if higher sensitivity is required |
| C3-462M | Visible band-pass (IRCUT filter) LP0689_P1010 | Mono | CS | Rarely used, most likely you need C3-462M-NF or C3-462M-NIR1 |
| C3-462M-NF | No Filter | Mono | CS | Full spectrum monochrome imaging |
| C3-462M-NIR1 | Long-pass NIR 850nm filter LP0689-P1012 | Mono | CS | Blocks visible light, can see only Infrared |