JST-GH modification

This camera modification is released for embedded applications with increased vibrations and has compact locking connector. 

USB-C Adapter

Camera can be equipped with USB-C breakout board and simple cable. Cable can be assembled by a customer using pre-crimped wires.

• GHR-05V-S- Cable housing
• AGHGH28K51 - Crimped jumper cable

Note - keep cable short and twist data lines to increase signal integrity. 

USB 2.0 signal pin-out

5 pin connector is used, one GND pin is dedicated for optional signal shielding.

Connector options

Camera has 3 connector options:

• Straight - C3-xxx-M12x-JSTS
• Right angle - C3-xxx-M12x-JSTR
• No connector (for direct cable soldering) - C3-xxx-M12x-JSTN