# JST-GH modification This camera modification is released for embedded applications with increased vibrations and has [compact locking connector](https://www.jst.com/products/crimp-style-connectors-wire-to-board-type/gh-connector/). #### USB-C Adapter Camera can be equipped with USB-C breakout board and simple cable. Cable can be assembled by a customer using pre-crimped wires. - GHR-05V-S- Cable housing - AGHGH28K51 - Crimped jumper cable

Note - keep cable short and twist data lines to increase signal integrity.

[![image-1768336348170.png](https://wiki.kurokesu.com/uploads/images/gallery/2026-01/scaled-1680-/image-1768336348170.png)](https://wiki.kurokesu.com/uploads/images/gallery/2026-01/image-1768336348170.png) #### USB 2.0 signal pin-out 5 pin connector is used, one GND pin is dedicated for optional signal shielding. [![image-1768337255339.png](https://wiki.kurokesu.com/uploads/images/gallery/2026-01/scaled-1680-/image-1768337255339.png)](https://wiki.kurokesu.com/uploads/images/gallery/2026-01/image-1768337255339.png) #### Connector options Camera has 3 connector options: - Straight - C3-xxx-M12x-JSTS - Right angle - C3-xxx-M12x-JSTR - No connector (for direct cable soldering) - C3-xxx-M12x-JSTN [![image-1768337524274.png](https://wiki.kurokesu.com/uploads/images/gallery/2026-01/scaled-1680-/image-1768337524274.png)](https://wiki.kurokesu.com/uploads/images/gallery/2026-01/image-1768337524274.png)