Demo

Connectivity

Connect cables between the lens kit and a computer:

L084+CM3_1.png

 

Software

Software is maintained on GitHub. Check the releases section https://github.com/Kurokesu/SCE2-SDK/releases for latest the compiled version.

screenshot2.png

Workflow

  1. Connect all the cables (HDMI and both USB) to a computer.
  2. After Raspberry Pi boots, it will start displaying a live picture from the camera
  3. Download, unzip and start demo software L084_SCE2_tester.exe
  4. Select com port and press connect, the lens should be identified, and controls enabled
  5. Click Seek ref for each axis (if the button is not enabled, try moving the axis manually, this is a temporary issue that will be fixed in future releases)
  6. Click each preset Go button to move the lens to the a different zoom/focus position.
  7. Move each axis manually < and > buttons to change focus and zoom.

Revision #9
Created 30 June 2022 10:37:44 by Saulius
Updated 4 July 2022 15:34:52 by Saulius