Demo Connectivity Connect cables between the lens kit and a computer: USB-micro cable #1 - Raspberry Pi power (optionally can be connected to the included wall charger) USB-micro cable #2 - lens controller HDMI - live camera view Software Software is maintained on GitHub. Check the releases section https://github.com/Kurokesu/SCE2-SDK/releases for latest the compiled version. Workflow Connect all the cables (HDMI and both USB) to a computer. After Raspberry Pi boots, it will start displaying a live picture from the camera Download, unzip and start demo software L084_SCE2_tester.exe Select com port and press connect, the lens should be identified, and controls enabled Click Seek ref for each axis (if the button is not enabled, try moving the axis manually, this is a temporary issue that will be fixed in future releases) Click each preset Go button to move the lens to the a different zoom/focus position. Move each axis manually < and > buttons to change focus and zoom.