# L117-DEVKIT
### Brief
L117 is 6.5-212mm focal length (32x) motorized zoom lens is designed for 1/1.8" image sensors, has zoom/focus/iris functions, designed for 8M sensors.
[](https://wiki.kurokesu.com/uploads/images/gallery/2024-04/img-9416.jpg)
### Specifications
#### Optics
Image sensor | 1/1.8" Effective image area > 9.3mm |
Focal distance | 6.5 ~ 212mm / ±5% |
Aperture | f/1.4 ~ f/4.9 |
Focus range | - WIDE: 0.5m - infinity
- TELE: 2.0m - infinity
|
Field of view (D=8.26mm)
| - WIDE: 70.7°
- TELE: 2.3°
|
Distortion
| - WIDE: -2.6%
- TELE: 1.0%
|
Recommended image sensor
| IMX334 |
Bare lens weight
| 437g |
#### Mechanics
Flange back (**FB**, see diagram below) | +0.93 (in glass t=0.3 IRCF)
|
Lens zoom structure | The stepper motor is directly connected to the screw |
Lens focusing structure | The stepper motor is directly connected to the screw |
Lens size | - Length: 146mm
- Width: 73mm
- Height: 67mm
- Front end diameter: 43mm
|
In order to accommodate different image sensors, the focal distance is set back by flange back (FB) distance. The actual distance for a specific sensor has to be calculated and spacers used. If the image plane is not set correctly, focus irregularities in the projected picture are expected.
[](https://wiki.kurokesu.com/uploads/images/gallery/2023-05/fb2.png)
Motor specifications
Screw pitch | 0.4mm |
Spiral rotation direction | Right |
Rated voltage | 5.0 VDC |
Coil resistance | - Zoom1: 20Ω ± 10% / phase (T=25°C)
- Zoom2: 20Ω ± 10% / phase (T=25°C)
- Focus: 55Ω ± 10% / phase (T=25°C)
- Iris: 35Ω ± 10% / phase (T=25°C)
|
Phase count | 2 |
Step angle | - Zoom1, Zoom2, Focus: 18° / step
- Iris: 0.6° / step
|
Operating temperature range | -30°C ~ +70°C |
#### Position alignment sensor PI
Model number | - Zoom1, Zoom2, Focus: RPI-222 ROHM
- Iris: GP1S196HCZ0F SHARP
|
#### Iris
Blade count | 10 |
Drive mode | Stepper motor |
#### IR switch
Coil resistance | 22.5 ± 10% (T=20°C) |
Operation voltage | 4.5 ~ 5.0V
|
Current consumption | 144 ~ 200mA
|
Filter thickness | 0.3mm
|
Filter count | 2
|
Switching time | 200 ~ 500ms
|
Filters | - Open air
- 380 ~ 650nm (TAVG >90%)
- BP780 (400~750nm TAVG >1%, 780~1100nm TAVG >90%)
|
### Camera adapter plates
292.84104B adapter plate was designed for IMX290 and IMX477 based cameras. [L084](https://www.kurokesu.com/shop/L084-DEVKIT) and [L117](https://www.kurokesu.com/shop/L117-DEVKIT) lenses can be mated with board level [C1\_PRO](https://www.kurokesu.com/shop/CAMERA_C1_PRO), [C2](https://www.kurokesu.com/shop/C2_USBC), and [IMX477\_LEGACY](https://www.kurokesu.com/shop/IMX477_Z1_LEGACY) camera boards.
[](https://wiki.kurokesu.com/uploads/images/gallery/2022-10/292-84104b.png)
### Dimensions
[](https://wiki.kurokesu.com/uploads/images/gallery/2024-04/l117-devkit-2.PNG)