Replace filter in C1 and C1 PRO cameras

C1 and C1 PRO cameras can be ordered with filter options:

  • 650nm short pass
  • 850nm long pass
  • No filter
  • Custom

In order to replace a only some basic tools and possibly optics cleaning materials and consumables are needed.


Make sure camera is clean so dust particles will not be transferred on a filter or imaging sensor.

c1_filter_1.png


Unscrew 4 DIN912 M2.5x10 screws (recent models were updated with Torx T5 screws) and remove back plate

c1_filter_2.png


Unscrew 4 DIN912 M2x5 screws holding PCBA