Skip to main content

Recently Updated Pages

Overview

Kurokesu IMX477 image sensor (1/2.3", 12.3MP) board with MIPI CSI-2 interface is designed to matc...

L085-DEVKIT

Brief L085 is 5.3-130mm focal length (25x) motorized zoom lens is designed for 1/2.7" image sens...

L084-DEVKIT

Brief L084 is 6.3-252mm focal length (40x) motorized zoom lens is designed for 1/1.8" image sens...

SCF4-M module

Pin description Technical specifications Module dimensions 16 x 23 x 2.3 mm [0.63 x 0....

Low profile M12 to CS lens adapter

Low profile M12 to CS lens adapter M12-TO-CS-ADAPTER was designed for wide-angle and fisheye lens...

L086-DEVKIT

Brief L086 is 6.8-120mm focal length (18x) motorized zoom lens is designed for 1/1.8" image sens...

D19x1_NIR_SCREWIN - Screw in low profile Longpass NIR 850nm filter

Low profile screw-in NIR filter is designed for CS and C-mount cameras. Filter can be used with m...

D19x1_IRCUT_SCREWIN - Screw in low profile IR-CUT filter

Low profile screw-in IR CUT filter is designed for CS and C-mount cameras. Filter can be used wit...

Replacing filter in C1 and C1 PRO cameras

C1 and C1 PRO cameras can be ordered with filter options: LP0508-P0050 650nm short pass LP050...

Optical filter influence on captured image

Even if camera sensor has RGB filters sensor is sensitive to wider range of light than human eye ...

F2LOW650 - IR CUT 650nm filter

This filter is designed and manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can b...

LP0508-P0050 - IR CUT filter

This filter is designed and manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can b...

F2HIGH830 - longpass NIR 830nm filter

Longpass filter is manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can be used fo...

LP0508-P0051 - Longpass NIR 850nm filter

Longpass filter is manufactured for C1, C1 PRO, C920, and Brio reworked cameras but can be used f...

Overview

Kurokesu industrial USB cameras with Sony Exmo R Starvis IMX290 sensors and internal h.264/MHPEG/...

Pinout

SCE2-M module has some STM32 pins routed to external pads. Pads grouped by functionality provided...

Dimensions and footprint

Mechanical dimensions Component footprint 3D STEP file is maintained on Github

L058-FZA-5Z50-CS

Description 5-50mm CS manual zoom lens Specifications Focal Length 5-50mm Apertu...

L059-FZA-2.8Z12-CS

Description 2.8-12mm CS manual zoom lens Specifications Focal Length 2.8-12mm Ap...

FFC connector pin-out

C2 FFC board camera should be used with 6 pin 0.5mm pitch FFC cable like 687606050002 from W├╝rth ...