Recently Updated Pages
Features
1″-32TPI mount for CS lens Multiple mounting options (all side walls and top has M3 tapped hol...
PCB revisions
RevA Proof of concept RevB Route 4 MIPI lines Add lens holes RevC Cleanup design ...
Using with Raspberry Pi
Raspberry Pi CM4 compute module Quick guide how to use camera module with Raspberry Pi compute m...
Features
Sensor: IMX477 Optical Format: 1/2.3″ (diagonal 7.857mm) Resolution: 4056(H) x 3040(V) 12.3MP...
Dimensions
3D model is maintained in our official GitHub repository
Specifications
Pixels 4056 H x 3040 V Sensor size 7.564 x 5.476 mm Shutter Electronic Rol...
Overview
Kurokesu IMX477 image sensor (1/2.3", 12.3MP) board with MIPI CSI-2 interface is designed to matc...
SCF4-M module
Pin description Technical specifications Module dimensions 16 x 23 x 2.3 mm [0.63 x 0....
Low profile M12 to CS lens adapter
Low profile M12 to CS lens adapter M12-TO-CS-ADAPTER was designed for wide-angle and fisheye lens...
D19x1_NIR_SCREWIN - Screw in low profile Longpass NIR 850nm filter
Low profile screw-in NIR filter is designed for CS and C-mount cameras. Filter can be used with m...
D19x1_IRCUT_SCREWIN - Screw in low profile IR-CUT filter
Low profile screw-in IR CUT filter is designed for CS and C-mount cameras. Filter can be used wit...
Replacing filter in C1 and C1 PRO cameras
C1 and C1 PRO cameras can be ordered with filter options: LP0508-P0050 650nm short pass LP050...
Optical filter influence on captured image
Even if camera sensor has RGB filters sensor is sensitive to wider range of light than human eye ...
F2LOW650 - IR CUT 650nm filter
This filter is designed and manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can b...
LP0508-P0050 - IR CUT filter
This filter is designed and manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can b...
F2HIGH830 - longpass NIR 830nm filter
Longpass filter is manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can be used fo...
LP0508-P0051 - Longpass NIR 850nm filter
Longpass filter is manufactured for C1, C1 PRO, C920, and Brio reworked cameras but can be used f...
Pinout
SCE2-M module has some STM32 pins routed to external pads. Pads grouped by functionality provided...
Dimensions and footprint
Mechanical dimensions Component footprint 3D STEP file is maintained on Github
FFC connector pin-out
C2 FFC board camera should be used with 6 pin 0.5mm pitch FFC cable like 687606050002 from Würth ...