Recently Updated Pages

Lightweight, USB powered, self sufficient 5~100mm motorized zoom lens camera kit for day/night op...

Lightweight, USB powered, self sufficient 5.5~96mm motorized zoom lens camera kit for day/night o...

Recommended GRBL parameters Motion controller needs to know about actuator capabilities. Assume...

SCE2-BREAKOUT is a fully integrated stepper motor controller module carrier board for quick SCE2-...

Python g-code sender Automating tasks can be done with Python script. Below is script example to...

Recommended GRBL parameters Motion controller needs to know about actuator capabilities. GRBL p...

Belt reducer RSB1 has GT2 belt in order to transfer power to plate. 12/60 tooth pulleys provide ...

RSB1 rotary actuator can be ordered directly on Kurokesu e-store

RJ45 pinout Pin Signal 1 GND 2 5V 3 SIG1 4 A1 5 A2 6 SIG2 7 B1 8 B2 SIG1 is us...

System On Module (SOM) design Fully integrated, ready to use 4 stepper motors drivers, up to 1/...

SCE2-M module DSLR control headers SCE2-MOTION has 4 outputs available. Controller is shipped...

Firmware is open-source GRBL based running on STM32 microcontroller.

Controller can drive up to 1.2A per channel, thus max power demand when all 4 motors are driven a...

Each actuator combination needs individual settings to be fine tuned. Below settings are for: RS...

Compact design with extra heat dissipation capabilities. Dimensions: 64 x 58 x 16.5mm Weight: 8...

SCE2-MOTION is a compact controller designed for robotic photography, controls motor actuators, a...

SCE2-MOTION can be controlled by any G-code sender like Candle, Universal-G-Code-Sender, and many...

LSA1 linear actuator can be ordered directly on Kurokesu e-store

Parameter Value Units Reduction ratio 5:1   Stepper motor step angle 1.8 deg Motor curre...

Start program Connect actuator to port A Connect cables (USB and power) TBD: picture Install ...