Skip to main content

Recently Updated Pages

GRBL motion settings

Recommended GRBL parameters Motion controller needs to know about actuator capabilities. Assume...

Some g-code examples and recipes

G-code while being universal machine control language has various flavors and capabilities. Below...

SCE2-BREAKOUT demo board

SCE2-BREAKOUT is a fully integrated stepper motor controller module carrier board for quick SCE2-...

Automating tasks

Python g-code sender Automating tasks can be done with Python script. Below is script example to...

Firmware

Open source STM32F103 GRBL firmware is maintained on Github By default firmware can be uploaded ...

GRBL motion settings

Recommended GRBL parameters Motion controller needs to know about actuator capabilities. GRBL p...

Drive train specifications

Belt reducer RSB1 has GT2 belt in order to transfer power to plate. 12/60 tooth pulleys provide ...

Ordering

RSB1 rotary actuator can be ordered directly on Kurokesu e-store

Wiring

RJ45 pinout Pin Signal 1 GND 2 5V 3 SIG1 4 A1 5 A2 6 SIG2 7 B1 8 B2 SIG1 is us...

Features

System On Module (SOM) design Fully integrated, ready to use 4 stepper motors drivers, up to 1/...

Schematics

SCE2-M module DSLR control headers SCE2-MOTION has 4 outputs available. Controller is shipped...

Firmware

Firmware is open-source GRBL based running on STM32 microcontroller.

Power supply

Controller can drive up to 1.2A per channel, thus max power demand when all 4 motors are driven a...

Default GRBL settings

Each actuator combination needs individual settings to be fine tuned. Below settings are for: RS...

Dimensions

Compact design with extra heat dissipation capabilities. Dimensions: 64 x 58 x 16.5mm Weight: 8...

Overview

SCE2-MOTION is a compact controller designed for robotic photography, controls motor actuators, a...

Control software

SCE2-MOTION can be controlled by any G-code sender like Candle, Universal-G-Code-Sender, and many...

Ordering

LSA1 linear actuator can be ordered directly on Kurokesu e-store

Specifications

Parameter Value Units Reduction ratio 5:1   Stepper motor step angle 1.8 deg Motor curre...

How to start using

Start program Connect actuator to port A Connect cables (USB and power) TBD: picture Install ...