Skip to main content

JST-GH modification

This camera modification is released for embedded applications with increased vibrations and has compact locking connector. 

USB-C Adapter

Camera can be equipped with USB-C breakout board and simple cable. Cable can be assembled by a customer using pre-crimped wires.

  • GHR-05V-S- Cable housing
  • AGHGH28K51 - Crimped jumper cable

Note - keep cable short and twist data lines to increase signal integrity. 

image-1768336348170.png

USB 2.0 signal pin-out

5 pin connector is used, one GND pin is dedicated for optional signal shielding.

image-1768337255339.png

Connector options

Camera has 3 connector options:

  • Straight - C3-xxx-M12x-JSTS
  • Right angle - C3-xxx-M12x-JSTR
  • No connector (for direct cable soldering) - C3-xxx-M12x-JSTN

image-1768337524274.png

Back to top