SCE2
Small 4 axis stepper motor controller module with g-code interpretator
Overview
SCE2-M is a fully integrated stepper motor controller module for digital control for limited spac...
Features
System On Module (SOM) design Fully integrated, ready to use 4 stepper motors drivers, up to 1/...
Pinout
SCE2-M module has some STM32 pins routed to external pads. Pads grouped by functionality provided...
Dimensions and footprint
Mechanical dimensions Component footprint 3D STEP file is maintained on Github
Firmware
Connectivity Firmware update can be done over SWD interface with an inexpensive programmer. 1. ...
Communication over USB
Drivers Stock firmware registers as "STM32 Virtual COM". Most modern operating systems should wo...
Quick start guide
First motor moves Assume axis has proper configuration sent earlier, making moves is as easy as ...
Some g-code examples and recipes
G-code while being universal machine control language has various flavors and capabilities. Below...
Reading and writing TMC2300 registers
Firmware has implemented functionality to read and write individual Trinamic TMC2300 registers ov...
Automating tasks
Python g-code sender Automating tasks can be done with Python script. Below is script example to...
SCE2-BREAKOUT demo board
SCE2-BREAKOUT is a fully integrated stepper motor controller module carrier board for quick SCE2-...
SCE2_dual_L012 dual lens controller board
SCE2_dual_L012 is a fully integrated stepper motor controller module carrier board for controllin...
Precautions and disclaimers
General disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS, AND DATA ARE SUBJECT TO CHANGE WITHOUT ...