Skip to main content

Recently Updated Pages

Features

1″-32TPI CS / M12 lens mount Multiple mounting options (all side walls and top has M3 ta...

Features

1″-32TPI mount for CS lens Multiple mounting options (all side walls and top has M3 tapped hol...

PCB revisions

RevA Proof of concept RevB Route 4 MIPI lines Add lens holes RevC Cleanup design ...

Using with Raspberry Pi

Raspberry Pi CM4 compute module Quick guide how to use camera module with Raspberry Pi compute m...

Features

Sensor: IMX477 Optical Format: 1/2.3″ (diagonal 7.857mm) Resolution: 4056(H) x 3040(V) 12.3MP...

Dimensions

3D model is maintained in our official GitHub repository

FFC connector pin-out

IMX477 camera board has 22pin 0.5mm spaced pitch FFC connector 687122183722 from Würth Elektronik...

Specifications

  Pixels 4056 H  x 3040 V Sensor size 7.564 x 5.476 mm Shutter Electronic Rol...

Overview

Kurokesu IMX477 image sensor (1/2.3", 12.3MP) board with MIPI CSI-2 interface is designed to matc...

L085-DEVKIT

Brief L085 is 5.3-130mm focal length (25x) motorized zoom lens is designed for 1/2.7" image sens...

L084-DEVKIT

Brief L084 is 6.3-252mm focal length (40x) motorized zoom lens is designed for 1/1.8" image sens...

SCF4-M module

Pin description Technical specifications Module dimensions 16 x 23 x 2.3 mm [0.63 x 0....

Low profile M12 to CS lens adapter

Low profile M12 to CS lens adapter M12-TO-CS-ADAPTER was designed for wide-angle and fisheye lens...

Introduction

Motorized zoom lens systems designed to be integrated into custom optical instruments and operate...

L086-DEVKIT

Brief L086 is 6.8-120mm focal length (18x) motorized zoom lens is designed for 1/1.8" image sens...

D19x1_NIR_SCREWIN - Screw in low profile Longpass NIR 850nm filter

Low profile screw-in NIR filter is designed for CS and C-mount cameras. Filter can be used with m...

D19x1_IRCUT_SCREWIN - Screw in low profile IR-CUT filter

Low profile screw-in IR CUT filter is designed for CS and C-mount cameras. Filter can be used wit...

Replacing filter in C1 and C1 PRO cameras

C1 and C1 PRO cameras can be ordered with filter options: LP0508-P0050 650nm short pass LP050...

Optical filter influence on captured image

Even if camera sensor has RGB filters sensor is sensitive to wider range of light than human eye ...

F2LOW650 - IR CUT 650nm filter

This filter is designed and manufactured for C1, C1 PRO, C920 and Brio reworked cameras but can b...